Manufacturing Knowledge Base
Reference material for engineers and buyers specifying LED strip: run lengths that hold in practice, what actually drives price, and where a design choice costs 30% more than it needs to.
This library answers the questions that arise before a purchase order: what a bin code value actually means, which material grade suits an application, how supplier capability should be verified, and which design features add cost without adding function. Every article states its scope and its limits, because a definition that pretends to cover everything is not useful for a decision.
LED Strip Heat: Profiles, Derating and Adhesive
Why a sealed aluminium profile halves LED strip life, how to calculate junction temperature, when to derate, and why adhesive tape fails above 40 °C.
Read articleLED Strip Lifetime: LM-80 and TM-21 Explained
Why an L70 rating of 50,000 hours can mean 20,000 hours in a sealed profile. LM-80 test conditions, TM-21 extrapolation limits and how to read a life claim.
Read articleAddressable LED Strip: SPI, DMX and Pixel Limits
How addressable LED strip is controlled: SPI timing, WS2812B versus WS2815, DMX universes, pixel-per-output limits, refresh rate and flicker on camera.
Read articleLED Strip for Lightboxes: Pitch, Depth and Uniformity
How module pitch, box depth and acrylic grade set lightbox uniformity. A pitch table by depth, the 85% target, and why adding modules makes hotspots worse.
Read articleSilicone Neon Flex vs Glass Neon: Cost and Life
Neon flex compared with glass neon on cost per metre, power, life, breakage, dimming and permitting — with the cases where glass still wins.
Read articleSizing a Power Supply for LED Strip: 80% Rule
How to size a 12 V or 24 V driver for LED strip: load calculation, the 80% derating rule, voltage drop on the low-voltage side, inrush current and dimming.
Read articleIP Ratings for LED Strip: IP65 to IP68 Explained
IP20 to IP68 explained for LED strip: what each rating tests, which sealing method delivers it, and the three installation conditions that void the warranty.
Read articleColour Consistency in LED Strip: SDCM and Binning
Why two 3000 K strips can look different, what SDCM 3 means in practice, and how project-level bin control prevents a visible tint step in a continuous run.
Read articleHow to Specify LED Strip: Six Numbers That Decide It
A specification checklist for LED strip: flux per metre, CRI and R9, SDCM, voltage and run length, IP rating and L70 at case temperature. With a template.
Read articleLED Strip Voltage Drop: Why the End of the Run Dims
Voltage drop explains why a 12 V strip dims after 5 m. Calculated losses at 1 oz to 3 oz copper, maximum run lengths and the three fixes that work.
Read articleCOB vs SMD LED Strip: Which One Fits the Project?
COB and SMD strip compared on dot visibility, cost per lumen, efficacy, cut length and heat. A decision table for specifying the right construction.
Read articleWhat Is a COB LED Strip? Construction and Limits
A COB LED strip bonds bare dies under one continuous phosphor layer, giving dot-free light. Construction, chip densities, cut lengths and when SMD is cheaper.
Read articleBrowse by category
Looking for a single definition rather than an article? The manufacturing glossary defines 20 core terms in one page, and the FAQ covers commercial questions such as MOQ, lead time and shipping terms.
Send a specification, get a quotation in 24 hours
Tell us the product type, run length, wattage, CCT, CRI and IP rating. You will receive a fixed price, a lead time, and the feed and driver arrangement in writing — no obligation, and no sales call unless you ask for one.